banner_page

ADF4002BCPZ

3V Clock/Frequency Synthesizer (RF), Phase Detector ADF4002 Clock Generators 20 Pins 20-WFQFN Exposed Pad, CSP 20 Terminals Surface Mount 2.7V~3.3V Tray


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADF4002BCPZ
  • Package: 20-WFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 265
  • Description: 3V Clock/Frequency Synthesizer (RF), Phase Detector ADF4002 Clock Generators 20 Pins 20-WFQFN Exposed Pad, CSP 20 Terminals Surface Mount 2.7V~3.3V Tray (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-WFQFN Exposed Pad, CSP
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tray
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
Termination SMD/SMT
Type Clock/Frequency Synthesizer (RF), Phase Detector
Subcategory PLL or Frequency Synthesis Circuits
Technology BICMOS
Voltage - Supply 2.7V~3.3V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.5mm
Frequency 400MHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADF4002
Output Clock
Pin Count 20
Number of Outputs 1
Operating Supply Voltage 3V
Power Supplies 3V
Supply Voltage-Min (Vsup) 2.7V
Operating Supply Current 5mA
Nominal Supply Current 5mA
Max Supply Current 6mA
Bandwidth 400MHz
Input CMOS, TTL
Ratio - Input:Output 2:1
PLL Yes with Bypass
Differential - Input:Output Yes/No
Height 830μm
Length 4mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADF4002BCPZ Overview


This clock IC is packaged using the Tray method. The 20-WFQFN Exposed Pad, CSP package contains this clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 20 terminations. This time clock generator should be voltaged at 3V. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. A maximum voltage of 2.7V should be used for this frequency generator for safety reasons. Clock generator ic works with 2.7V~3.3V. Based on test statistics, ambient temperature should be set at -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. As far as electrical parts go, this component can be classified as a Clock/Frequency Synthesizer (RF), Phase Detector component. An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e. This part number ADF4002 is related to the following electrical components. There is an available 20 pin on the clock generators. RF synthesizers can handle a voltage of 3V as the supply voltage. As such, it is often referred to as a kind of PLL or Frequency Synthesis Circuits clock PLL. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. By operating at a frequency of 400MHz, frequency generator is able to achieve high efficiency. A supply current of 5mA needs to be provided to fully play RF synthesizer's function. The maximal current supplied for this frequency synthesizer operation reaches 6mA.

ADF4002BCPZ Features


Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 3V

ADF4002BCPZ Applications


There are a lot of Analog Devices Inc. ADF4002BCPZ Clock Generators applications.

  • Microprocessor clock multipliers
  • Mobile telephones
  • Wide area power system
  • Frequency Modulation (FM) stereo decoders
  • Radio receivers
  • Frequency synthesis
  • HDD recorders
  • Ports
  • Wi-Fi routers
  • 1 Gigabit Ethernet

Write a review

Note: HTML is not translated!
    Bad           Good