banner_page

ADF4002SRU-EP-RL7

3V Clock/Frequency Synthesizer (RF), Phase Detector 400MHz ADF4002 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.7V~3.3V Digi-Reel?


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADF4002SRU-EP-RL7
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 230
  • Description: 3V Clock/Frequency Synthesizer (RF), Phase Detector 400MHz ADF4002 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.7V~3.3V Digi-Reel? (Kg)

Details

Tags

Parameters
Contact Plating Lead, Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -55°C~125°C
Packaging Digi-Reel®
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Clock/Frequency Synthesizer (RF), Phase Detector
Voltage - Supply 2.7V~3.3V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Reach Compliance Code unknown
Base Part Number ADF4002
Output Clock
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Supply Voltage-Min (Vsup) 2.7V
Number of Circuits 1
Operating Supply Current 5mA
Nominal Supply Current 5mA
Frequency (Max) 400MHz
Input CMOS, TTL
Ratio - Input:Output 2:1
PLL Yes with Bypass
Differential - Input:Output Yes/No
Length 5mm
Width 4.4mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

ADF4002SRU-EP-RL7 Overview


As a clock IC, it is packaged by the Digi-Reel? method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. 16 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3V. A clock generator's input is called CMOS, TTL and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 400MHz maximum. PLL clock is mounted in the way of Surface Mount. The supply voltage for this frequency synthesizer should be kept above 2.7V for safety considerations. Clock generators should operate with the voltage supply of 2.7V~3.3V. Test statistics estimate a temperature of -55°C~125°C, which should be set as the ambient temperature. There are several logic levels in Clock logic that can be used with this clock generator. A Clock/Frequency Synthesizer (RF), Phase Detector is a classification for the electronic part in question. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. It is possible to find its related electronic parts by searching for the base part number ADF4002. There are 16 pins that are available on the frequency generator. PLL clock can handle a voltage of 3.3V as its supply voltage. This time clock generator requires a supply current of 5mA in order to operate properly.

ADF4002SRU-EP-RL7 Features


Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3.3V

ADF4002SRU-EP-RL7 Applications


There are a lot of Analog Devices Inc. ADF4002SRU-EP-RL7 Clock Generators applications.

  • Carrier synchronization in wired communication
  • Deep space exploration
  • Modems
  • High-speed optical transport network (OTN)
  • Automatic test equipment
  • Mixed mode (analog and digital) applications
  • Infotainment systems
  • Skew suppression
  • Pagers
  • Peripheral devices

Write a review

Note: HTML is not translated!
    Bad           Good