ADF4106BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Frequency | 6GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4106 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 10.5mA |
| Max Supply Current | 13mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4106BRUZ Overview
Clock generator is packaged in the way of Tube. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 16 terminations found in the file. A voltage of 3V should be applied to this electronic frequency generator. In this case, CMOS, TTL is designed to be the input of the clock generator. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.7V. Clock PLL works with 2.7V~3.3V supply voltage provided. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. Clock logic levels are supported by this RF synthesizer. This is an electronic part that can be classified as a Clock/Frequency Synthesizer (RF) in this case. It is a 16-bit clock PLL designed specifically for microprocessors. ADF4106 is the base part number for finding related electronic parts. The frequency generator is equipped with 16 pins. There is a maximum supply voltage of 3V that electronic frequency generator can handle. The device is usually classified as a type of PLL or Frequency Synthesis Circuits device. 1 signal outputs allow for maximi1ation of output frequency. At a frequency of 6GHz, the system can achieve high efficiency. For the time clock generator to operate properly, 13mA of supply current are required. In this operation, a maximum current of 13mA is supplied to the clock generator.
ADF4106BRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
ADF4106BRUZ Applications
There are a lot of Analog Devices Inc. ADF4106BRUZ Clock Generators applications.
- Wireless handsets
- Digital HDTV systems
- High-speed optical transport network (OTN)
- Symbol synchronization
- Signal demodulation
- Vector network analyzers (VNA)
- Signal analyzer
- Electronic countermeasures
- Notebooks
- Satellite navigation communication
