ADF4106BRUZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4106 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 10.5mA |
| Frequency (Max) | 6GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4106BRUZ-R7 Overview
As a clock IC, it uses the Tape & Reel (TR) package. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains 16 terminations that can be found in frequency synthesizer. A voltage of 3V should be applied to this electronic frequency generator. A clock generator's input is called CMOS, TTL and it is designed as the input for this clock generator. It provides a maximum frequency of 6GHz. The Surface Mount allows this electrical component to be easily installed on the panel. There should be a voltage supply above 2.7V for this frequency generator in order to ensure its safety. Clock PLL works with 2.7V~3.3V supply voltage provided. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. It's compatible with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Clock/Frequency Synthesizer (RF) component. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. The related electrical components for the base part number ADF4106 can be found below. There is an available 16 pin on the clock generators. In terms of the supply voltage, analog clock generator can handle 3V volts. As such, it is often referred to as a kind of PLL or Frequency Synthesis Circuits clock PLL. The output frequency can be magnified as high as possible with the assistance of 1 signal outputs. To fully perform its function, time clock generator requires a supply current of 13mA.
ADF4106BRUZ-R7 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
ADF4106BRUZ-R7 Applications
There are a lot of Analog Devices Inc. ADF4106BRUZ-R7 Clock Generators applications.
- Coherent detection of the signal
- Multiplexing communication
- Satellite receivers
- Small signal recovery
- FPGA and processor clocks
- Microwave backhaul IF
- High-frequency induction heating
- Wireless infrastructure
- Microwave radio
- Precision auxiliary angle deflection measurement
