ADF4106SCPZ-EP
| Parameters | |
|---|---|
| Pin Count | 20 |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 10.5mA |
| Max Supply Current | 10.5mA |
| Frequency (Max) | 6GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Frequency Synthesizer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4106 |
| Output | Clock |
ADF4106SCPZ-EP Overview
Tray-method packaging is used for clock ICs. As part of the 20-VFQFN Exposed Pad, CSP package, this clock generator is embedded. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains 16 terminations that can be found in frequency synthesizer. For this clock generator ic, a voltage of 3V is required. As the Clock PLL's input, CMOS, TTL is designed to be used in order to generate the clock signal. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. A clock-based RF synthesizer that provides a max frequency of 6GHz is available. The Surface Mount allows the electrical component to be installed conveniently on the panel. In order to maintain safety, this frequency generator should be supplied with voltages above 2.7V. There should be 2.7V~3.3V provided with this RF synthesizer. Based on the test statistics, an ambient temperature of -55°C~125°C should be set. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Frequency Synthesizer component. An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e. The related electronic parts of part number ADF4106 are listed below. There is a 20 pin that is available on the frequency synthesizers. This time clock generator can handle a voltage of 3V as its supply voltage. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. The supply current of 13mA needs to be provided to fully play clock generator's function. The maximal current supplied for phase locked loop's operation reaches 10.5mA.
ADF4106SCPZ-EP Features
Available in the 20-VFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 3V
ADF4106SCPZ-EP Applications
There are a lot of Analog Devices Inc. ADF4106SCPZ-EP Clock Generators applications.
- Multi-function printers
- Set-top boxes
- Carrier synchronization in wired communication
- Mechanical devices
- Walkie-talkies
- Jitter reduction
- Modems
- Smartphones
- Wi-Fi routers
- Time to digital converters
