ADF4110BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Clock/Frequency Synthesizer (RF) |
| Additional Feature | 6-BIT SWALLOW COUNTER |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4110 |
| Output | Clock |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Frequency (Max) | 550MHz |
| Supply Current-Max (Isup) | 5.5mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4110BCPZ-RL7 Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. Embedded in the 20-WFQFN Exposed Pad, CSP package is this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains 20 terminations that can be found in frequency synthesizer. The supply voltage of 3V allows for high efficiency. This clock generator receives its inputs from CMOS, TTL, which is designed to be the clock source. RF synthesizers based on this clock provide frequencies up to 550MHz maximum. This component can be conveniently installed on the panel thanks to the Surface Mount. There should be a voltage supply above 2.7V for this frequency generator in order to ensure its safety. In terms of supply voltage, RF synthesizer works with 2.7V~5.5V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. In this case, we are dealing with a frequency synthesizer that can be used with Clock logic levels. As far as electrical parts go, this component can be classified as a Clock/Frequency Synthesizer (RF) component. An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e. According to the base part number ADF4110, its related parts can be found. There is a 20 pin that is available on the digital clock generator. The maximum supply voltage that analog clock generator can handle is 5V. As a result, it is commonly classified as a type of PLL or Frequency Synthesis Circuits clock PLL. With 6-BIT SWALLOW COUNTER, this clock generator produces better clock signals. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. A supply current of 4.5mA is required to fully operate clock PLL. For this analog clock generator, a maximum supply current of 5.5mA should be avoided.
ADF4110BCPZ-RL7 Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V
ADF4110BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4110BCPZ-RL7 Clock Generators applications.
- Reference signals to RF systems
- Ultrasound diagnosis
- Integrated phase noise in aerospace systems
- Communication infrastructure
- PMR (Professional Mobile Radio)
- GPS systems
- Sampling clocks for ADC and DAC
- Small signal recovery
- Frequency Modulation (FM) stereo decoders
- Carrier synchronization in wired communication
