ADF4110BRU
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF) |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 6-BIT SWALLOW COUNTER |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4110 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 17mA |
| Frequency (Max) | 550MHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADF4110BRU Overview
In order to package it as a clock IC, the Tube package is used. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 16 terminations can be found in frequency synthesizer. To operate this time clock generator, 3V voltage should be applied. CMOS, TTL is designed for clock generator's input. 550MHz is the maximal value for normal operation. Thanks to the Surface Mount, this electric component can easily be installed on a panel. For safety reasons, this frequency synthesizer should have a voltage supply above 2.7V. There should be 2.7V~5.5V provided with this RF synthesizer. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. It's compatible with Clock logic levels. This electronic component can be classified into Clock/Frequency Synthesizer (RF). This clock-generating IC is a 16-bit device designed explicitly for microprocessors. This part number is related to its related electronic parts. There are 16 pins on the frequency generators that are available for use. The maximum supply voltage that clock generator can handle is 5V. The device is usually classified as a type of PLL or Frequency Synthesis Circuits device. The RF synthesizer features 6-BIT SWALLOW COUNTER for improved clock signal output. Clock PLL has 1 signal outputs to maximi1e output frequency. For its full function, a supply current of 4.5mA is required. In this RF synthesizer operation, 17mA of current are supplied.
ADF4110BRU Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4110BRU Applications
There are a lot of Analog Devices Inc. ADF4110BRU Clock Generators applications.
- Frequency synthesis
- Laptops
- Radiotelephones
- Microwave point-to-point systems
- 1 Gigabit Ethernet
- Bluetooth receivers
- Quenching?
- Signal demodulation
- Automatic control
- Mixed mode (analog and digital) applications
