Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Clock/Frequency Synthesizer (RF) |
Additional Feature |
6-BIT SWALLOW COUNTER |
Subcategory |
PLL or Frequency Synthesis Circuits |
Technology |
BICMOS |
Voltage - Supply |
2.7V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADF4111 |
Output |
Clock |
Pin Count |
16 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Supply Voltage-Min (Vsup) |
2.7V |
Operating Supply Current |
4.5mA |
Nominal Supply Current |
4.5mA |
Frequency (Max) |
1.4GHz |
Supply Current-Max (Isup) |
2.5mA |
Input |
CMOS, TTL |
Ratio - Input:Output |
2:1 |
PLL |
Yes |
Differential - Input:Output |
Yes/No |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADF4111BRUZ-RL Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 16 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3V. This Clock PLL will be fed by CMOS, TTL as its input. The frequency generator has a maximum frequency of 1.4GHz. PLL clock is mounted in the way of Surface Mount. This frequency synthesizer requires a supply voltage above 2.7V to be safe. There are 2.7V~5.5V available for use with this clock PLL. The temperature should be set at -40°C~85°C to ensure reliable performance. The RF synthesizer is compatible with Clock logic levels. This electronic component can be classified into Clock/Frequency Synthesizer (RF). Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. It is possible to find its related electronic parts by searching for the base part number ADF4111. There is a 16 pin that is available on the frequency synthesizers. There is a maximum supply voltage of 5V that this analog clock generator can handle. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. This clock PLL features 6-BIT SWALLOW COUNTER for better clock signal output. Clock PLL is facilitated with 1 signal outputs to magnify output frequency as high as possible. A supply current of 4.5mA needs to be provided to fully play RF synthesizer's function. This electronic frequency generator should not be supplied with more than 2.5mA of current.
ADF4111BRUZ-RL Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4111BRUZ-RL Applications
There are a lot of Analog Devices Inc. ADF4111BRUZ-RL Clock Generators applications.
- Modems
- Skew suppression
- Coherent detection of the signal
- Frequency synthesis
- Small signal recovery
- GPS systems
- Signal frequency synthesis circuits
- Space communucation
- 10 Gigabit Ethernet
- Media broadcast servers