ADF4111BRUZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF) |
| Additional Feature | 6-BIT SWALLOW COUNTER |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4111 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Frequency (Max) | 1.4GHz |
| Supply Current-Max (Isup) | 2.5mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4111BRUZ-RL7 Overview
This clock IC is packaged using the Tape & Reel (TR) method. Clock PLL is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 16 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3V. The input of this clock generator is designed to be CMOS, TTL. This clock-based frequency generator provides a frequency up to 1.4GHz Max. Because of the Surface Mount, clock PLL can be easily mounted on the panel. For safety reasons, this frequency synthesizer should have a voltage supply above 2.7V. Clock generator ic works with 2.7V~5.5V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. Clock logic levels are supported by this RF synthesizer. Clock/Frequency Synthesizer (RF) is the type of electrical part that this component is classified as. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. Related electrical parts can be found for the base part number ADF4111. There is an available 16 pin on the PLL. Time clock generator is capable of handling a voltage of 5V. PLL or Frequency Synthesis Circuits-type frequency generators are usually classified as this type. The RF synthesizer features 6-BIT SWALLOW COUNTER for improved clock signal output. 1 signal outputs maximi1e the output frequency. The supply current of 4.5mA needs to be provided to fully play clock generator's function. During normal operation, the maximum supply current should not exceed 2.5mA.
ADF4111BRUZ-RL7 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4111BRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4111BRUZ-RL7 Clock Generators applications.
- PMR (Professional Mobile Radio)
- Televisions
- Microwave radio
- Line cards used in telephone exchange
- Pulsed digital systems
- Set-top boxes
- Antenna automatic tracking
- Notebooks
- CB radios
- Wi-Fi routers
