Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-WFQFN Exposed Pad, CSP |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
Type |
Clock/Frequency Synthesizer (RF) |
Additional Feature |
6-BIT SWALLOW COUNTER:0 TO 63 |
Subcategory |
PLL or Frequency Synthesis Circuits |
Technology |
BICMOS |
Voltage - Supply |
2.7V~5.5V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.5mm |
Frequency |
4GHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADF4113 |
Output |
Clock |
Pin Count |
20 |
Number of Outputs |
1 |
Operating Supply Voltage |
5V |
Supply Voltage-Min (Vsup) |
2.7V |
Operating Supply Current |
11mA |
Nominal Supply Current |
30mA |
Max Supply Current |
16mA |
Input |
CMOS, TTL |
Ratio - Input:Output |
2:1 |
PLL |
Yes |
Differential - Input:Output |
Yes/No |
Height |
830μm |
Length |
4mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADF4113HVBCPZ Overview
Tray-method packaging is used for clock ICs. The 20-WFQFN Exposed Pad, CSP package embeds this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. 20 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3V. A clock generator's input is called CMOS, TTL and it is designed as the input for this clock generator. Surface Mount-slots make it easy to mount this electronic component on panels. The supply voltage (Vsup) should be kept above 2.7V for normal operation. Clock generators should operate with the voltage supply of 2.7V~5.5V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. This is a clock generator compatible with Clock logic levels. It is possible to classify this electronic component as a Clock/Frequency Synthesizer (RF). It is a 20-bit IC that is designed for microprocessors specifically. The related electronic parts of part number ADF4113 are listed below. There are a number of 20 pins that are available on the frequency synthesizers. Time clock generator can handle a voltage of 5V as the supply voltage. As a result, it is commonly classified as a type of PLL or Frequency Synthesis Circuits clock PLL. 6-BIT SWALLOW COUNTER:0 TO 63 is included in this frequency generator to enhance clock signal output. Clock PLL is configured with 1 output. At 4GHz, frequency synthesizer achieves high efficiency. A supply current of 11mA is required to fully operate clock PLL. It is possible to supply up to 16mA of current for this clock generator operation.
ADF4113HVBCPZ Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V
ADF4113HVBCPZ Applications
There are a lot of Analog Devices Inc. ADF4113HVBCPZ Clock Generators applications.
- Wireless handsets
- Ultrasound diagnosis
- Cell phones
- Set-top boxes
- Digital logic circuits
- Main oscillator in receiver
- Local oscillator source in receiver
- Mechanical devices
- Clock synchronization
- Microprocessor clock multipliers