ADF4113HVBCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Clock/Frequency Synthesizer (RF) |
| Additional Feature | 6-BIT SWALLOW COUNTER:0 TO 63 |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4113 |
| Output | Clock |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 30mA |
| Frequency (Max) | 4GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4113HVBCPZ-RL7 Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. 20-WFQFN Exposed Pad, CSP contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 20 terminations can be found in frequency generators. Basically, a voltage of 3V should be applied to this electronic frequency generator. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. This clock-based frequency generator provides a frequency up to 4GHz Max. PLL clock is mounted in the way of Surface Mount. A maximum voltage of 2.7V should be used for this frequency generator for safety reasons. This clock PLL works with a supply voltage of 2.7V~5.5V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. A frequency synthesizer which is compatible with the Clock logic levels is presented here. This electronic component can be classified into Clock/Frequency Synthesizer (RF). Microprocessor-specific clock PLL with 20 bits. These related electrical parts are available for the base part number ADF4113. A 20 pin is available on the PLL. Electronic frequency generator can handle voltages up to 5V. As a result, it is commonly classified as a type of PLL or Frequency Synthesis Circuits clock PLL. In order to provide better clock signal output, this frequency synthesizer is equipped with 6-BIT SWALLOW COUNTER:0 TO 63. The output frequency can be amplified as high as possible with its 1 signal outputs. To fully perform its function, time clock generator requires a supply current of 11mA.
ADF4113HVBCPZ-RL7 Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V
ADF4113HVBCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4113HVBCPZ-RL7 Clock Generators applications.
- Clock signals to the high-speed Digital RF circuits
- Electronic countermeasures
- Televisions
- Frequency synthesis
- DVD recorders
- FSK demodulators
- Bit synchronization
- Walkie-talkies
- High-speed optical transport network (OTN)
- Medical equipment
