ADF4113HVBRUZ
| Parameters | |
|---|---|
| Base Part Number | ADF4113 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF) |
| Additional Feature | 6-BIT SWALLOW COUNTER:0 TO 63 |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 4GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
ADF4113HVBRUZ Overview
As a clock IC, PLLs is packaged using the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains a total of 16 terminations within RF synthesizer. Basically, a voltage of 3V should be applied to this electronic frequency generator. A clock generator's input is called CMOS, TTL and it is designed as the input for this clock generator. Surface Mount-slots make it easy to mount this electronic component on panels. In order to maintain safety, this frequency generator should be supplied with voltages above 2.7V. As far as the supply voltage is concerned, clock PLL can be used with 2.7V~5.5V. The temperature should be set at -40°C~85°C to ensure reliable performance. In this case, we are dealing with a frequency synthesizer that can be used with Clock logic levels. It has been classified as a Clock/Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. According to the base part number ADF4113, its related parts can be found. A 16 pin is available on the clock PLL. RF synthesizers can handle a voltage of 5V as the supply voltage. And basically, this clock generator is often classified as a kind of PLL or Frequency Synthesis Circuits. There is a 6-BIT SWALLOW COUNTER:0 TO 63 feature on this frequency generator in order to produce a better clock signal. 1 signal outputs are provided for enhancing output frequency as much as possible. High efficiency is achieved when operating at a frequency of 4GHz. For the clock time generator to function properly, 11mA of supply current must be provided. During this clock generator operation, a maximum current of 30mA is supplied.
ADF4113HVBRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4113HVBRUZ Applications
There are a lot of Analog Devices Inc. ADF4113HVBRUZ Clock Generators applications.
- Precision auxiliary angle deflection measurement
- Communication infrastructure
- Smartphones
- Microprocessor clock multipliers
- Local oscillators (LOs)
- Deep space exploration
- Medical equipment
- FPGA and processor clocks
- Local oscillator source in receiver
- Frequency synthesis
