ADF4113HVBRUZ-RL7
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF) |
| Additional Feature | 6-BIT SWALLOW COUNTER:0 TO 63 |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4113 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 30mA |
| Frequency (Max) | 4GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
ADF4113HVBRUZ-RL7 Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 16 terminations. This clock generator ic should receive a voltage of 3V. It is designed that the Clock PLL's input should be CMOS, TTL. Providing a maximum frequency of 4GHz, this clock-based RF synthesizer is suitable for a variety of applications. Surface Mount-slots make it easy to mount this electronic component on panels. It is safe to use this frequency synthesizer with a supply voltage above 2.7V. As long as you provide 2.7V~5.5V supply voltage, it will work. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. Clock logic levels are supported by this RF synthesizer. This electronic component can be classified as a Clock/Frequency Synthesizer (RF). There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. It is possible to find its related electronic parts by searching for the base part number ADF4113. A 16 pin is available on the PLL. There is a maximum supply voltage of 5V that frequency generators can handle. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. In order to provide better clock signal output, this frequency synthesizer is equipped with 6-BIT SWALLOW COUNTER:0 TO 63. Clock PLL is configured with 1 output. To fully perform its function, time clock generator requires a supply current of 11mA.
ADF4113HVBRUZ-RL7 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4113HVBRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4113HVBRUZ-RL7 Clock Generators applications.
- Mobile telephones
- Test equipment
- Quenching?
- Mechanical devices
- Clock generation systems
- Bit synchronization
- Simple clock clean-up circuits
- Aerospace and defense
- Satellite receivers
- Phase modulation cellular systems
