banner_page

ADF4118BRUZ

3V Clock/Frequency Synthesizer (RF) ADF4118 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.7V~5.5V Tube


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADF4118BRUZ
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 995
  • Description: 3V Clock/Frequency Synthesizer (RF) ADF4118 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.7V~5.5V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Clock/Frequency Synthesizer (RF)
Subcategory PLL or Frequency Synthesis Circuits
Technology BICMOS
Voltage - Supply 2.7V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Frequency 3GHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADF4118
Output Clock
Pin Count 16
Number of Outputs 2
Operating Supply Voltage 5V
Number of Circuits 1
Operating Supply Current 6.5mA
Nominal Supply Current 6.5mA
Max Supply Current 7.5mA
Input CMOS, TTL
Ratio - Input:Output 2:1
PLL Yes
Differential - Input:Output Yes/No
Height 1.05mm
Length 5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADF4118BRUZ Overview


Clock ICs are packaged using the Tube method. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. There are 16 terminations found in this file. The clock generator ic should be grounded with a voltage of 3V. CMOS, TTL is designed as this clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There are 2.7V~5.5V different supply voltages that can be provided for this RF synthesizer. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of Clock logic. This is an electronic part that can be classified as a Clock/Frequency Synthesizer (RF) in this case. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. According to the base part number, its related parts can be founded. There are 16 pins on the frequency generator that are available for use. Supply voltage 5V is what clock generator can handle. This clock generator can be classified as a kind of PLL or Frequency Synthesis Circuits in general. The output frequency is magnified as high as possible with 2 signal outputs. At a frequency of 3GHz, the system can achieve high efficiency. For the RF synthesizer to function properly, a supply current of 6.5mA must be provided. During this clock generator operation, a maximum current of 7.5mA is supplied.

ADF4118BRUZ Features


Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V

ADF4118BRUZ Applications


There are a lot of Analog Devices Inc. ADF4118BRUZ Clock Generators applications.

  • Modems
  • Local oscillator source in receiver
  • High-speed optical transport network (OTN)
  • Wireless base station for LTE, LTE-advanced
  • Automatic control
  • Automatic test equipment
  • Medical equipment
  • Simple clock clean-up circuits
  • Motor speed controls
  • Wireless handsets

Write a review

Note: HTML is not translated!
    Bad           Good