Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Clock/Frequency Synthesizer (RF) |
Subcategory |
PLL or Frequency Synthesis Circuits |
Technology |
BICMOS |
Voltage - Supply |
2.7V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADF4118 |
Output |
Clock |
Pin Count |
16 |
Number of Outputs |
2 |
Operating Supply Voltage |
5V |
Number of Circuits |
1 |
Operating Supply Current |
6.5mA |
Nominal Supply Current |
6.5mA |
Frequency (Max) |
3GHz |
Supply Current-Max (Isup) |
7.5mA |
Input |
CMOS, TTL |
Ratio - Input:Output |
2:1 |
PLL |
Yes |
Differential - Input:Output |
Yes/No |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
ADF4118BRUZ-RL7 Overview
Tape & Reel (TR)-method packaging is used for clock ICs. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As you can see, it consists of 16 terminations. Basically, a voltage of 3V should be applied to this electronic frequency generator. In this case, CMOS, TTL is designed to be the input of the clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 3GHz Max. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generator ic works with 2.7V~5.5V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. A frequency synthesizer which is compatible with the Clock logic levels is presented here. It is possible to classify this electronic component as a Clock/Frequency Synthesizer (RF). It is a 16-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number ADF4118. Clock generator is designed with 16 pins. The maximum supply voltage that analog clock generator can handle is 5V. PLL or Frequency Synthesis Circuits-type frequency generators are usually classified as this type. Clock PLL is facilitated with 2 signal outputs to magnify output frequency as high as possible. This time clock generator requires a supply current of 6.5mA in order to operate properly. Time clock generator supply currents should not exceed 7.5mA.
ADF4118BRUZ-RL7 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4118BRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4118BRUZ-RL7 Clock Generators applications.
- High-frequency induction heating
- Infotainment systems
- Mixed mode (analog and digital) applications
- Broadcast communication
- Clock signals to the high-speed Digital RF circuits
- Frequency synthesis
- Computers to manage memory cards
- Signal modulation and demodulation
- Medical equipment
- Test equipment