ADF4150BCPZ-RL7
| Parameters | |
|---|---|
| Pin Count | 24 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Frequency (Max) | 4.4GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:2 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | Fractional N, Integer N, Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4150 |
| Output | Clock |
ADF4150BCPZ-RL7 Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. As part of the 24-WFQFN Exposed Pad, CSP package, this clock generator is embedded. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 24 terminations can be found in frequency generators. A voltage of 3.3V should be applied to this electronic frequency generator. In this clock generator, CMOS, TTL is used as the input to the clock. Using 1 circuits, the electronic part's full performance can be accessed. There is a maximum frequency of 4.4GHz Max with this clock-based frequency generator. Because of the Surface Mount, clock PLL can be easily mounted on the panel. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. In terms of supply voltage, RF synthesizer works with 3V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. This is a clock generator compatible with Clock logic levels. It has been classified as a Fractional N, Integer N, Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. There is a 24-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electronic parts of part number ADF4150 are listed below. It is possible to connect to the PLL via 24 pins. RF synthesizers can handle voltages up to 3.3V. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. 3 signal outputs enable clock PLL to magnify output frequency as high as possible. A supply current of 50mA needs to be provided to fully play RF synthesizer's function.
ADF4150BCPZ-RL7 Features
Available in the 24-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4150BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4150BCPZ-RL7 Clock Generators applications.
- Time to digital converters
- Melting
- Coherent detection of the signal
- Laptops
- Coherent carrier tracking
- Wireless base station for LTE, LTE-advanced
- FPGA and processor clocks
- Signal demodulation
- Digital circuits
- PCI express cards
