ADF4150HVBCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4150 |
| Output | Clock |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Analog IC - Other Type | PLL FREQUENCY SYNTHESIZER |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Frequency (Max) | 3GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4150HVBCPZ-RL7 Overview
Clock ICs are packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 32-VFQFN Exposed Pad, CSP package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 32 terminations can be found in frequency generators. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This clock generator receives its inputs from CMOS, TTL, which is designed to be the clock source. It is possible to access the full performance of the electrical part by implementing 1 circuits. Providing a maximum frequency of 3GHz, this clock-based RF synthesizer is suitable for a variety of applications. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageFor safety reasons, this frequency generator's supply voltage should remain above 3V. Clock generator ic works with 3V~3.6V. The temperature should be set at -40°C~85°C to ensure reliable performance. The RF synthesizer is compatible with Clock logic levels. Microprocessor-specific clock PLL with 32 bits. You can find related electrical components to the base part number ADF4150. It is possible to connect to the frequency generators via 32 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. Fundamentally, this is a kind of PLL or Frequency Synthesis Circuits clock PLL. Clock PLL has 4 signal outputs to maximi4e output frequency. The supply current of 50mA needs to be provided to fully play clock generator's function. It is classified as a PLL FREQUENCY SYNTHESIZER-electronic frequency generator since it is an analog IC.
ADF4150HVBCPZ-RL7 Features
Available in the 32-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4150HVBCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4150HVBCPZ-RL7 Clock Generators applications.
- Peripheral devices
- FMCW Radar
- FM demodulation networks for FM operations
- Laptops
- Local oscillators (LOs)
- Satellite navigation communication
- Various decoding circuits
- Microwave backhaul IF
- Wi-Fi routers
- GPS systems
