Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-VFQFN Exposed Pad, CSP |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
Type |
Fractional N Synthesizer (RF) |
Subcategory |
PLL or Frequency Synthesis Circuits |
Voltage - Supply |
2.7V~3.3V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.5mm |
Frequency |
4GHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADF4153 |
Output |
Clock |
Pin Count |
20 |
Number of Outputs |
1 |
Operating Supply Voltage |
5V |
Supply Voltage-Max (Vsup) |
3.3V |
Supply Voltage-Min (Vsup) |
2.7V |
Operating Supply Current |
20mA |
Nominal Supply Current |
20mA |
Max Supply Current |
24mA |
Input |
CMOS, TTL |
Ratio - Input:Output |
2:1 |
PLL |
Yes |
Differential - Input:Output |
Yes/No |
Divider/Multiplier |
No/Yes |
Height |
830μm |
Length |
4mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADF4153BCPZ Overview
It is packaged using the Tray method since it is a clock IC. Embedded in the 20-VFQFN Exposed Pad, CSP package is this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. 20 terminations can be found in frequency generators. Basically, this time clock generator needs a voltage of 3V. This Clock PLL will be fed by CMOS, TTL as its input. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There is a maximum voltage of 3.3V for this clock generator. It is safe to use this frequency synthesizer with a supply voltage above 2.7V. This clock PLL works with a supply voltage of 2.7V~3.3V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. This is an electronic part that can be classified as a Fractional N Synthesizer (RF) in this case. There is a 20-bit clock-generating IC built specifically for microprocessors in this frequency generator. It is possible to find its related electronic parts by searching for the base part number ADF4153. It is possible to connect to the frequency generators via 20 pins. Electronic frequency generator can handle voltages up to 5V. Fundamentally, this is a kind of PLL or Frequency Synthesis Circuits clock PLL. Clock PLL has 1 signal outputs to maximi1e output frequency. At a frequency of 4GHz, frequency generator is capable of achieving high efficiency. To fully perform its function, time clock generator requires a supply current of 20mA. When this RF synthesizer is operated at its maximum current, it will supply 24mA.
ADF4153BCPZ Features
Available in the 20-VFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V
ADF4153BCPZ Applications
There are a lot of Analog Devices Inc. ADF4153BCPZ Clock Generators applications.
- Integrated phase noise in aerospace systems
- Walkie-talkies
- Automatic control
- Signal analyzer
- Symbol synchronization
- Frequency synthesis
- Quenching?
- Electronic equipment
- Phase modulation cellular systems
- Picocells, femtocells and small cells