ADF4153BRU
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Fractional N Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4153 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Max Supply Current | 24mA |
| Frequency (Max) | 4GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | No/Yes |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADF4153BRU Overview
As a clock IC, it uses the Tube package. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 240. As a result, frequency synthesizers can be found to contain 16 terminations. This clock generator ic should receive a voltage of 3V. In this clock generator, CMOS, TTL is used as the input to the clock. Providing a maximum frequency of 4GHz, this clock-based RF synthesizer is suitable for a variety of applications. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximal supply voltage this clock generator would take is 3.3V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.7V. Clock generators should operate with the voltage supply of 2.7V~3.3V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. Clock logic levels are supported by this RF synthesizer. This electronic component is usually classified as a Fractional N Synthesizer (RF) component. Clock PLL is equipped with 16 pin count. The related electronic parts of part number ADF4153 are listed below. PF synthesizers is equipped with 16 pins. This time clock generator can handle a voltage of 5V as its supply voltage. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. The output frequency is magnified as high as possible with 1 signal outputs. For the clock time generator to function properly, 20mA of supply current must be provided. In this operation, a maximum current of 24mA is supplied to the clock generator.
ADF4153BRU Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4153BRU Applications
There are a lot of Analog Devices Inc. ADF4153BRU Clock Generators applications.
- Radio receivers
- Wi-Fi routers
- Space communucation
- Frequency shifting decodes
- DVD recorders
- Aerospace and defense
- Picocells, femtocells and small cells
- Quenching?
- Telecommunication systems
- Microwave backhaul IF
