ADF4153BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Fractional N Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Frequency | 4GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4153 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Max Supply Current | 24mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | No/Yes |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4153BRUZ Overview
As a clock IC, PLLs is packaged using the Tube method. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 16 terminations to be found. Basically, a voltage of 3V should be applied to this electronic frequency generator. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. 3.3V would be the maximum supply voltage for this clock generator. It is safe to use this frequency synthesizer with a supply voltage above 2.7V. There should be 2.7V~3.3V provided with this RF synthesizer. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. Clock is designed for clock generator's output. A Fractional N Synthesizer (RF) is a classification for the electronic part in question. It is a 16-bit clock PLL designed specifically for microprocessors. Related electrical parts can be found for the base part number ADF4153. The frequency synthesizer has 16 pins that are available. There is a maximum supply voltage of 5V that this analog clock generator can handle. Fundamentally, this is a kind of PLL or Frequency Synthesis Circuits clock PLL. The frequency synthesizer features 1 signal outputs to ensure as high a frequency as possible. At a frequency of 4GHz, the system can achieve high efficiency. A supply current of 20mA needs to be provided to fully play RF synthesizer's function. During this clock generator operation, a maximum current of 24mA is supplied.
ADF4153BRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4153BRUZ Applications
There are a lot of Analog Devices Inc. ADF4153BRUZ Clock Generators applications.
- Microwave point-to-point systems
- Cell phones
- Threshold extension
- Remote telemetry and instrumentation
- 1 Gigabit Ethernet
- Microwave backhaul IF
- Precision auxiliary angle deflection measurement
- Bluetooth receivers
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Bluetooth transmitters
