banner_page

ADF4154BRUZ

3V Fractional N Synthesizer (RF) ADF4154 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.7V~3.3V Tube


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADF4154BRUZ
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 212
  • Description: 3V Fractional N Synthesizer (RF) ADF4154 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.7V~3.3V Tube (Kg)

Details

Tags

Parameters
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Frequency 4GHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADF4154
Output Clock
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 3V
Power Supplies 33/5.5V
Supply Voltage-Min (Vsup) 2.7V
Operating Supply Current 20mA
Nominal Supply Current 20mA
Max Supply Current 24mA
Input CMOS, TTL
Ratio - Input:Output 2:1
PLL Yes
Differential - Input:Output Yes/No
Divider/Multiplier No/Yes
Height 1.05mm
Length 5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Fractional N Synthesizer (RF)
Subcategory PLL or Frequency Synthesis Circuits
Voltage - Supply 2.7V~3.3V
Terminal Position DUAL
Terminal Form GULL WING

ADF4154BRUZ Overview


Clock generator is packaged in the way of Tube. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. As you can see, it consists of 16 terminations. Clock generator ics require a voltage of 3V. This Clock PLL will be fed by CMOS, TTL as its input. This component can be conveniently installed on the panel thanks to the Surface Mount. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. Clock PLL works with 2.7V~3.3V supply voltage provided. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. As the name suggests, this is a clock generator that is compatible with Clock logic levels. An electrical part such as this one can be classified as a Fractional N Synthesizer (RF) component. It is a 16-bit clock PLL designed specifically for microprocessors. The related electronic parts of part number ADF4154 are listed below. There is a 16 pin that is available on the frequency synthesizers. Clock PLL is capable of handling a voltage of 3V. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. Clock PLL is configured with 1 output. When operated at 4GHz, frequency synthesizer achieves high efficiency. A supply current of 20mA is required to fully operate clock PLL. The maximal current supplied for phase locked loop's operation reaches 24mA.

ADF4154BRUZ Features


Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V

ADF4154BRUZ Applications


There are a lot of Analog Devices Inc. ADF4154BRUZ Clock Generators applications.

  • GPS systems
  • Instrument
  • Infotainment systems
  • Wireless handsets
  • Automatic test equipment
  • Signal modulation and demodulation
  • Antenna automatic tracking
  • Microwave backhaul IF
  • Wide area power system
  • Peripheral devices

Write a review

Note: HTML is not translated!
    Bad           Good