ADF4154BRUZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Fractional N Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4154 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Power Supplies | 33/5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Frequency (Max) | 4GHz |
| Supply Current-Max (Isup) | 24mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | No/Yes |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4154BRUZ-RL7 Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. Clock PLL is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As a result, frequency synthesizers can be found to contain 16 terminations. This electronic frequency generator requires a voltage of 3V. A clock generator's input is called CMOS, TTL and it is designed as the input for this clock generator. 4GHz is the maximal value for normal operation. The Surface Mount allows this electrical component to be easily installed on the panel. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. As long as there are 2.7V~3.3V supply voltages provided, clock generator ic should work. The temperature should be set at -40°C~85°C to ensure reliable performance. As the name suggests, this is a clock generator that is compatible with Clock logic levels. This electronic component is usually classified as a Fractional N Synthesizer (RF) component. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. According to the base part number, its related parts can be founded. PF synthesizers is equipped with 16 pins. There is a maximum supply voltage of 3V that frequency generators can handle. Fundamentally, this is a kind of PLL or Frequency Synthesis Circuits clock PLL. Clock PLL is facilitated with 1 signal outputs to magnify output frequency as high as possible. For its full function, a supply current of 20mA is required. This electronic frequency generator should not be supplied with more than 24mA of current.
ADF4154BRUZ-RL7 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
ADF4154BRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4154BRUZ-RL7 Clock Generators applications.
- MRI
- Aerospace and defense
- Time to digital converters
- Broadcast communication
- Tracking filters
- Microwave point-to-point systems
- Test equipment
- Notebooks
- High-frequency induction heating
- High-speed communication applications
