ADF4156BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Fractional N Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 6GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4156 |
| Output | Clock |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 26mA |
| Nominal Supply Current | 26mA |
| Max Supply Current | 32mA |
| Frequency (Max) | 6.2GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | Yes/Yes |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4156BCPZ Overview
In order to package it as a clock IC, the Tray package is used. 20-WFQFN Exposed Pad, CSP contains this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 20 terminations found in this file. The supply voltage of 3V allows for high efficiency. In this case, CMOS, TTL is designed to be the input of the clock generator. Providing a maximum frequency of 6.2GHz, this clock-based RF synthesizer is suitable for a variety of applications. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Approximately 3.3V is the maximum supply voltage needed by this time clock generator. The supply voltage (Vsup) should be kept above 2.7V for normal operation. As long as there are 2.7V~3.3V supply voltages provided, clock generator ic should work. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. There are several logic levels in Clock logic that can be used with this clock generator. It is possible to classify this electronic component as a Fractional N Synthesizer (RF). The clock-generating IC is a 20-bit device designed specifically for microprocessors. The related electrical components for the base part number ADF4156 can be found below. There are 20 pins on the frequency generators that are available for use. RF synthesizers can handle voltages up to 5V. This clock generator can be classified as a kind of PLL or Frequency Synthesis Circuits in general. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. When operated at 6GHz, frequency synthesizer achieves high efficiency. For the clock time generator to function properly, 26mA of supply current must be provided. This clock generator operation can supply up to 32mA of current.
ADF4156BCPZ Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V
ADF4156BCPZ Applications
There are a lot of Analog Devices Inc. ADF4156BCPZ Clock Generators applications.
- Precision auxiliary angle deflection measurement
- Infotainment systems
- CPUs
- Microwave radio
- Cell phones
- Smartphones
- Signal generator
- Ports
- Space communucation
- VSAT (Small Ground Satellite Station)
