ADF4156BCPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Fractional N Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4156 |
| Output | Clock |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 26mA |
| Nominal Supply Current | 26mA |
| Frequency (Max) | 6.2GHz |
| Supply Current-Max (Isup) | 32mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | Yes/Yes |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4156BCPZ-RL Overview
This clock IC is packaged using the Tape & Reel (TR) method. In the 20-WFQFN Exposed Pad, CSP package, there is an embedded clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are a total of 20 terminations in this file. Basically, a voltage of 3V should be applied to this electronic frequency generator. A clock generator's input is called CMOS, TTL and it is designed as the input for this clock generator. 6.2GHz is the maximal value for normal operation. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. The maximal supply voltage (Vsup) reaches 3.3V. There should be a voltage supply above 2.7V for this frequency generator in order to ensure its safety. As long as you provide 2.7V~3.3V supply voltage, it will work. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. The frequency synthesizer in this product is compatible with all levels of Clock logic. An electrical part such as this one can be classified as a Fractional N Synthesizer (RF) component. In this IC, a 20-bit frequency generator is designed specifically for use in microprocessors. The related electrical components for the base part number ADF4156 can be found below. It is possible to connect to the frequency generators via 20 pins. Supply voltage 5V is what time clock generator can handle. A PLL or Frequency Synthesis Circuits clock generator is essentially what this device is. Clock PLL has 1 signal outputs to maximi1e output frequency. For the RF synthesizer to function properly, a supply current of 26mA must be provided. Time clock generator supply currents should not exceed 32mA.
ADF4156BCPZ-RL Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V
ADF4156BCPZ-RL Applications
There are a lot of Analog Devices Inc. ADF4156BCPZ-RL Clock Generators applications.
- Precision auxiliary angle deflection measurement
- Carrier synchronization in wired communication
- Small signal recovery
- Signal frequency synthesis circuits
- Microwave point-to-point systems
- Ports
- Clock synchronization
- Digital switching systems
- Mobile telephones
- Closed circuit systems
