Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Fractional N Synthesizer (RF) |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
PLL or Frequency Synthesis Circuits |
Voltage - Supply |
2.7V~3.3V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADF4156 |
Output |
Clock |
Pin Count |
16 |
Number of Outputs |
1 |
Operating Supply Voltage |
5V |
Supply Voltage-Max (Vsup) |
3.3V |
Supply Voltage-Min (Vsup) |
2.7V |
Operating Supply Current |
26mA |
Nominal Supply Current |
26mA |
Frequency (Max) |
6.2GHz |
Supply Current-Max (Isup) |
32mA |
Input |
CMOS, TTL |
Ratio - Input:Output |
2:1 |
PLL |
Yes |
Differential - Input:Output |
Yes/No |
Divider/Multiplier |
Yes/Yes |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADF4156BRUZ-RL7 Overview
Clock generator is packaged in the way of Tape & Reel (TR). Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. As a result of this, we can find 16 terminations. To operate this time clock generator, 3V voltage should be applied. The input of this clock generator is designed to be CMOS, TTL. An up to 6.2GHz frequency is provided by this clock-based RF synthesizer. PLL clock is mounted in the way of Surface Mount. It would be possible to supply this clock PLL with 3.3V of power. For safety reasons, this frequency generator's supply voltage should remain above 2.7V. As long as you provide 2.7V~3.3V supply voltage, it will work. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. A frequency synthesizer which is compatible with the Clock logic levels is presented here. As far as electrical parts go, this component can be classified as a Fractional N Synthesizer (RF) component. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The related electronic parts of part number ADF4156 are listed below. There are 16 pins that are available on the frequency generator. Time clock generator can handle a voltage of 5V as the supply voltage. This clock generator can be classified as a kind of PLL or Frequency Synthesis Circuits in general. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. To fully perform its function, time clock generator requires a supply current of 26mA. During normal operation, the maximum supply current should not exceed 32mA.
ADF4156BRUZ-RL7 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4156BRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4156BRUZ-RL7 Clock Generators applications.
- Phase modulation cellular systems
- Satellite receivers
- Wireless base station for LTE, LTE-advanced
- Walkie-talkies
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Coherent detection of the signal
- Skew suppression
- Microprocessor clock multipliers
- Test and instrumentation equipment
- Simple clock clean-up circuits