Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-WFQFN Exposed Pad, CSP |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
Type |
Fractional N Synthesizer (RF) |
Subcategory |
PLL or Frequency Synthesis Circuits |
Voltage - Supply |
2.7V~3.3V |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADF4157 |
Output |
Clock |
Pin Count |
20 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3V |
Power Supplies |
3.3/5.5V |
Supply Voltage-Min (Vsup) |
2.7V |
Operating Supply Current |
23mA |
Nominal Supply Current |
23mA |
Frequency (Max) |
6GHz |
Supply Current-Max (Isup) |
29mA |
Input |
CMOS, TTL |
Ratio - Input:Output |
2:1 |
PLL |
Yes |
Differential - Input:Output |
Yes/No |
Divider/Multiplier |
Yes/Yes |
Length |
4mm |
Width |
4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADF4157BCPZ-RL7 Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. 20-WFQFN Exposed Pad, CSP contains this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. It contains a total of 20 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 3V. It is designed that the Clock PLL's input should be CMOS, TTL. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 6GHz. The Surface Mount allows this electrical component to be easily installed on the panel. For safety reasons, this frequency synthesizer should have a voltage supply above 2.7V. Clock generator ic works with 2.7V~3.3V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. As the name suggests, this is a clock generator that is compatible with Clock logic levels. Fractional N Synthesizer (RF) is the type of electrical part that this component is classified as. In this IC, a 20-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. The clock PLL has 20 pins that are available. RF synthesizers can handle a voltage of 3V as the supply voltage. The device is usually classified as a type of PLL or Frequency Synthesis Circuits device. Clock PLL has 1 signal outputs to maximi1e output frequency. To fully perform its function, time clock generator requires a supply current of 23mA. There should be a maximum supply current of 29mA for this time clock generator.
ADF4157BCPZ-RL7 Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 3V
ADF4157BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4157BCPZ-RL7 Clock Generators applications.
- Microwave backhaul IF
- Signal frequency synthesis circuits
- Media broadcast servers
- Infotainment systems
- 1 Gigabit Ethernet
- Signal demodulation
- Digital circuits
- Communication infrastructure
- VSAT (Small Ground Satellite Station)
- Automatic control system test