ADF4193WCCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer (RF) |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4193 |
| Output | Clock |
| Pin Count | 32 |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Operating Supply Current | 68mA |
| Nominal Supply Current | 30mA |
| Frequency (Max) | 3.5GHz |
| Supply Current-Max (Isup) | 35mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | Yes/Yes |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4193WCCPZ-RL7 Overview
The Tape & Reel (TR) method is used for packaging clock ICs. As part of the 32-WFQFN Exposed Pad, CSP package, this clock generator is embedded. This clock generator will sustain a maximum temperature of 260 when reflown. 32 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 3V is required. CMOS, TTL is designed as this clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 3.5GHz Max can be achieved with this clock-based frequency synthesizer. PLL clock is mounted in the way of Surface Mount. The supply voltage for this frequency synthesizer should be kept above 2.7V for safety considerations. There are 2.7V~3.3V available for use with this clock PLL. As determined by the test statistics, the ambient temperature should be set to -40°C~105°C. As the name suggests, this is a clock generator that is compatible with Clock logic levels. This electronic component can be classified into Clock/Frequency Synthesizer (RF). Microprocessor-specific clock PLL with 32 bits. The related electrical components for the base part number ADF4193 can be found below. There is a 32 pin that is available on the digital clock generator. There is a maximum supply voltage of 3V that this analog clock generator can handle. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. This clock generator is a member of Automotive series. For the time clock generator to operate properly, 68mA of supply current are required. There should be a maximum supply current of 35mA for this time clock generator.
ADF4193WCCPZ-RL7 Features
Available in the 32-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 3V
ADF4193WCCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4193WCCPZ-RL7 Clock Generators applications.
- Skew suppression
- Electronic equipment
- Satellite receivers
- FM demodulation networks for FM operations
- Tracking filters
- Deep space exploration
- Infotainment systems
- Electronic countermeasures
- Clock generation systems
- Multiplexing communication
