banner_page

ADF4208BRUZ-RL

3V Clock/Frequency Synthesizer (RF) 2GHz ADF4208 Clock Generators 20 Pins 20-TSSOP (0.173, 4.40mm Width) 20 Terminals Surface Mount 2.7V~5.5V Tape & Reel (TR)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADF4208BRUZ-RL
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 748
  • Description: 3V Clock/Frequency Synthesizer (RF) 2GHz ADF4208 Clock Generators 20 Pins 20-TSSOP (0.173, 4.40mm Width) 20 Terminals Surface Mount 2.7V~5.5V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type Clock/Frequency Synthesizer (RF)
Subcategory PLL or Frequency Synthesis Circuits
Voltage - Supply 2.7V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADF4208
Output Clock
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Elements 2
Number of Circuits 1
Operating Supply Current 14mA
Nominal Supply Current 14mA
Frequency (Max) 2GHz
Supply Current-Max (Isup) 5mA
Input CMOS, TTL
Ratio - Input:Output 3:1
PLL Yes
Differential - Input:Output Yes/No
Divider/Multiplier No/No
Length 6.5mm
Width 4.4mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADF4208BRUZ-RL Overview


As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 20-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains 20 terminations that can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3V. The input of this clock generator is designed to be CMOS, TTL. To access the electronic component's full performance, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 2GHz is available. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. There are 2.7V~5.5V different supply voltages that can be provided for this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. A frequency synthesizer which is compatible with the Clock logic levels is presented here. This electronic component can be classified into Clock/Frequency Synthesizer (RF). In this IC, a 20-bit frequency generator is designed specifically for use in microprocessors. ADF4208 is the base part number for finding related electronic parts. The frequency generator is equipped with 20 pins. The supply voltage should be maintained at 5V for high efficiency. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. For the RF synthesizer to function properly, a supply current of 14mA must be provided. There are 2 elements in this clock generator which has a low jitter performance. This electronic frequency generator should not be supplied with more than 5mA of current.

ADF4208BRUZ-RL Features


Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V

ADF4208BRUZ-RL Applications


There are a lot of Analog Devices Inc. ADF4208BRUZ-RL Clock Generators applications.

  • Coherent carrier tracking
  • Computers to manage memory cards
  • Bit synchronization
  • Satellite receivers
  • Electronic countermeasures
  • MRI
  • Signal demodulation
  • Deep space exploration
  • Tracking filters
  • Motor speed controls

Write a review

Note: HTML is not translated!
    Bad           Good