ADF4212BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Clock/Frequency Synthesizer (RF/IF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4212 |
| Output | Clock |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 11.5mA |
| Nominal Supply Current | 11.5mA |
| Max Supply Current | 100μA |
| Frequency (Max) | 2.7GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 3:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | No/No |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4212BRUZ Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. 20-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains 20 terminations that can be found in frequency synthesizer. For this clock generator ic, a voltage of 3V is required. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. It provides a maximum frequency of 2.7GHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. This clock PLL works with a supply voltage of 2.7V~5.5V. The temperature should be set at -40°C~85°C to ensure reliable performance. There are several logic levels in Clock logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock/Frequency Synthesizer (RF/IF). It is a 20-bit IC that is designed for microprocessors specifically. The related electronic parts of part number ADF4212 are listed below. There is a 20 pin that is available on the frequency synthesizers. The maximum supply voltage that clock generator can handle is 5V. As such, it is often referred to as a kind of PLL or Frequency Synthesis Circuits clock PLL. A supply current of 11.5mA is required to fully operate clock PLL. In this case, we are looking at a frequency generator with 2 elements that is low-jitter. The maximal current supplied for this frequency synthesizer operation reaches 100μA.
ADF4212BRUZ Features
Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4212BRUZ Applications
There are a lot of Analog Devices Inc. ADF4212BRUZ Clock Generators applications.
- Communication infrastructure
- Test equipment
- Telecommunication systems
- Infotainment systems
- Clock synchronization
- Signal analyzer
- Sampling clocks for ADC and DAC
- Notebooks
- FMCW Radar
- Clock recovery
