ADF4212LBRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Clock/Frequency Synthesizer (RF/IF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4212 |
| Output | Clock |
| Pin Count | 20 |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Power Supplies | 3V |
| Number of Circuits | 1 |
| Operating Supply Current | 7.5mA |
| Nominal Supply Current | 7.5mA |
| Max Supply Current | 10mA |
| Frequency (Max) | 2.4GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 3:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Height | 1.05mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4212LBRUZ Overview
Tube-method packaging is used for clock ICs. There is a clock generator embedded in the 20-TSSOP (0.173, 4.40mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result of this, we can find 20 terminations. This time clock generator should be voltaged at 3V. This clock generator receives its inputs from CMOS, TTL, which is designed to be the clock source. For full access to the electronic component's capabilities, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 2.4GHz is available. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock generators should operate with the voltage supply of 2.7V~3.3V. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in Clock logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock/Frequency Synthesizer (RF/IF). This clock-generating IC is a 20-bit device designed explicitly for microprocessors. These related electrical parts are available for the base part number ADF4212. There is an available 20 pin on the PLL. In terms of the supply voltage, PLL clock can handle 3V volts. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. A supply current of 7.5mA needs to be provided to fully play RF synthesizer's function. An 8-element clock PLL with a low jitter performance is available on this page. In this operation, a maximum current of 10mA is supplied to the clock generator.
ADF4212LBRUZ Features
Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
ADF4212LBRUZ Applications
There are a lot of Analog Devices Inc. ADF4212LBRUZ Clock Generators applications.
- Mobile telephones
- FSK demodulators
- VSAT (Small Ground Satellite Station)
- Instrument
- Medical equipment
- Signal demodulation
- Clock recovery
- Digital switching systems
- Picocells, femtocells and small cells
- Signal frequency synthesis circuits
