ADF4350BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Fanout Distribution, Fractional N, Integer N, Clock/Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 4.4GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4350 |
| Output | Clock |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Number of Circuits | 1 |
| Operating Supply Current | 110mA |
| Nominal Supply Current | 110mA |
| Max Supply Current | 110mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4350BCPZ Overview
Tray-method packaging is used for clock ICs. There is a clock generator embedded in the 32-WFQFN Exposed Pad, CSP package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 32 terminations can be found in frequency synthesizer. The supply voltage of 3.3V allows for high efficiency. This Clock PLL will be fed by CMOS, TTL as its input. For a full understanding of the electronic part's performance, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would be possible to supply this clock PLL with 3.6V of power. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. This clock PLL works with a supply voltage of 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. The RF synthesizer is compatible with Clock logic levels. An electrical part such as this one can be classified as a Fanout Distribution, Fractional N, Integer N, Clock/Frequency Synthesizer (RF) component. An IC that generates clocks specifically for microprocessors, this clock PLL is 32-bits in si32e. The related electronic parts of part number ADF4350 are listed below. There are a number of 32 pins that are available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. The frequency synthesizer features 4 signal outputs to ensure as high a frequency as possible. At 4.4GHz, frequency synthesizer achieves high efficiency. This time clock generator requires a supply current of 110mA in order to operate properly. During this clock generator operation, a maximum current of 110mA is supplied.
ADF4350BCPZ Features
Available in the 32-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4350BCPZ Applications
There are a lot of Analog Devices Inc. ADF4350BCPZ Clock Generators applications.
- Digital switching systems
- Medical equipment
- Radiotelephones
- FPGA and processor clocks
- Pulsed digital systems
- Infotainment systems
- Wireless handsets
- Signal analyzer
- Clock recovery
- FMCW Radar
