ADF4350BCPZ-RL7
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4350 |
| Output | Clock |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Operating Supply Current | 110mA |
| Nominal Supply Current | 110mA |
| Frequency (Max) | 4.4GHz |
| Supply Current-Max (Isup) | 27mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Fanout Distribution, Fractional N, Integer N, Clock/Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
ADF4350BCPZ-RL7 Overview
Clock generator is packaged in the way of Tape & Reel (TR). A Clock PLL is included with the 32-WFQFN Exposed Pad, CSP package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 32 terminations found in the file. The supply voltage of 3.3V allows for high efficiency. This Clock PLL will be fed by CMOS, TTL as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. It provides a maximum frequency of 4.4GHz. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. Clock PLL works with 3V~3.6V supply voltage provided. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. This is a clock generator compatible with Clock logic levels. A Fanout Distribution, Fractional N, Integer N, Clock/Frequency Synthesizer (RF) is a classification for the electronic part in question. An IC that generates clocks specifically for microprocessors, this clock PLL is 32-bits in si32e. These related electrical parts are available for the base part number ADF4350. There is a 32 pin that is available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. As a result, it is commonly classified as a type of PLL or Frequency Synthesis Circuits clock PLL. 4 signal outputs maximi4e the output frequency. In order for it to fully perform time clock generator's functions, it needs a supply current of 110mA. There should be a maximum supply current of 27mA for this time clock generator.
ADF4350BCPZ-RL7 Features
Available in the 32-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4350BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4350BCPZ-RL7 Clock Generators applications.
- Clock generation systems
- Electronic countermeasures
- Symbol synchronization
- Cable television converter boxes
- Cell phones
- Local oscillators (LOs)
- Computers to manage memory cards
- Signal demodulation
- Frequency synthesis
- Local oscillator source in receiver
