ADF4360-1BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Fanout Distribution, Integer N Synthesizer (RF) |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Telecom ICs |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.45GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4360 |
| Output | Clock |
| Pin Count | 24 |
| Number of Outputs | 3 |
| Max Output Current | 500μA |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 48mA |
| Max Output Voltage | 2.6V |
| Max Input Voltage | 1.5V |
| Input | CMOS, TTL |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4360-1BCPZ Overview
A clock integrated circuit is packaged in a Tray-shaped package because it is for use as a clock. A Clock PLL is included with the 24-WFQFN Exposed Pad, CSP package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. In it, there are 24 terminations to be found. Clock generator ics require a voltage of 3.3V. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on test statistics, ambient temperature should be set at -40°C~85°C. This is a clock generator compatible with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Fanout Distribution, Integer N Synthesizer (RF) component. There is a 24-bit clock-generating IC built specifically for microprocessors in this frequency generator. It is possible to find its related electronic parts by searching for the base part number ADF4360. There is a 24 pin that is available on the digital clock generator. The supply voltage should be maintained at 3.3V for high efficiency. A Other Telecom ICs clock generator is essentially what this device is. 3 signal outputs maximi3e the output frequency. High efficiency is achieved when operating at a frequency of 2.45GHz. In order for it to fully perform time clock generator's functions, it needs a supply current of 50mA.
ADF4360-1BCPZ Features
Available in the 24-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4360-1BCPZ Applications
There are a lot of Analog Devices Inc. ADF4360-1BCPZ Clock Generators applications.
- Test equipment
- Set-top boxes
- Main oscillator in receiver
- Quenching?
- FMCW Radar
- Radar
- Peripheral devices
- Wireless infrastructure
- Ports
- Walkie-talkies
