ADF4360-2BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Fanout Distribution, Integer N Synthesizer (RF) |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Telecom ICs |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.17GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4360 |
| Output | Clock |
| Pin Count | 24 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 48mA |
| Max Supply Current | 10mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4360-2BCPZ Overview
As a clock IC, PLLs is packaged using the Tray method. This clock generator is embedded in the 24-WFQFN Exposed Pad, CSP package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains 24 terminations that can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.3V. In this clock generator, CMOS, TTL is used as the input to the clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. This component can be conveniently installed on the panel thanks to the Surface Mount. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. The frequency synthesizer in this product is compatible with all levels of Clock logic. As far as this electronic part is concerned, it can be classified as a Fanout Distribution, Integer N Synthesizer (RF) component. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. According to the base part number, its related parts can be founded. It is possible to connect to the PLL via 24 pins. This time clock generator can handle a voltage of 3.3V as its supply voltage. Other Telecom ICs-type frequency generators are usually classified as this type. The output frequency is magnified as high as possible with 3 signal outputs. Using a frequency of 2.17GHz allows frequency synthesizer to achieve high efficiencies. For the RF synthesizer to function properly, a supply current of 50mA must be provided. It is possible to supply up to 10mA of current for this clock generator operation.
ADF4360-2BCPZ Features
Available in the 24-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4360-2BCPZ Applications
There are a lot of Analog Devices Inc. ADF4360-2BCPZ Clock Generators applications.
- Radio receivers
- Cable television converter boxes
- Broadcast communication
- Mobile telephones
- CB radios
- Signal generator
- Integrated phase noise in aerospace systems
- Cellular/4G
- Modems
- Frequency synthesis
