Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-WFQFN Exposed Pad, CSP |
Number of Pins |
24 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Fanout Distribution, Integer N Synthesizer (RF) |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Other Telecom ICs |
Technology |
BICMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADF4360 |
Output |
Clock |
Pin Count |
24 |
Number of Outputs |
3 |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Operating Supply Current |
50mA |
Nominal Supply Current |
48mA |
Frequency (Max) |
1.95GHz |
Input |
CMOS, TTL |
Ratio - Input:Output |
1:2 |
PLL |
Yes |
Differential - Input:Output |
No/No |
Divider/Multiplier |
Yes/No |
Length |
4mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADF4360-3BCPZRL Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. In the 24-WFQFN Exposed Pad, CSP package, there is an embedded clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 24 terminations. This electronic frequency generator requires a voltage of 3.3V. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. Providing a maximum frequency of 1.95GHz, this clock-based RF synthesizer is suitable for a variety of applications. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Clock PLL works with 3V~3.6V supply voltage provided. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. Clock logic levels are supported by this RF synthesizer. This electronic component can be classified into Fanout Distribution, Integer N Synthesizer (RF). Microprocessors are specifically designed to use this clock-generating IC, which has a 24-bit output. The related electrical components for the base part number ADF4360 can be found below. The frequency generator is equipped with 24 pins. The supply voltage should be maintained at 3.3V for high efficiency. As a result, it is commonly classified as a type of Other Telecom ICs clock PLL. 3 signal outputs allow for maximi3ation of output frequency. The supply current of 50mA needs to be provided to fully play clock generator's function.
ADF4360-3BCPZRL Features
Available in the 24-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4360-3BCPZRL Applications
There are a lot of Analog Devices Inc. ADF4360-3BCPZRL Clock Generators applications.
- Quenching?
- Motor speed controls
- Set-top boxes
- Clock recovery
- Microwave backhaul IF
- Mixed mode (analog and digital) applications
- Line cards used in telephone exchange
- DVD add-on cards for multimedia PCs
- Wide area power system
- FMCW Radar