ADF4360-4BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Fanout Distribution, Integer N Synthesizer (RF) |
| Subcategory | Other Telecom ICs |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.45GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4360 |
| Output | Clock |
| Pin Count | 24 |
| Number of Outputs | 3 |
| Max Output Current | 500μA |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 48mA |
| Frequency (Max) | 1.75GHz |
| Max Output Voltage | 2.6V |
| Max Input Voltage | 1.5V |
| Input | CMOS, TTL |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4360-4BCPZ Overview
This clock IC is packaged using the Tray method. There is a clock generator embedded in the 24-WFQFN Exposed Pad, CSP package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 24 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. It is designed that the Clock PLL's input should be CMOS, TTL. To access the electronic component's full performance, 1 circuits are implemented. Providing a maximum frequency of 1.75GHz, this clock-based RF synthesizer is suitable for a variety of applications. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock generators should operate with the voltage supply of 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. This is a clock generator compatible with Clock logic levels. This electronic component can be classified into Fanout Distribution, Integer N Synthesizer (RF). Microprocessor-specific clock PLL with 24 bits. You can find related electrical components to the base part number ADF4360. There are 24 pins that are available on the clock PLL. This time clock generator can handle a voltage of 3.3V as its supply voltage. And basically, this clock generator is often classified as a kind of Other Telecom ICs. Clock PLL is facilitated with 3 signal outputs to magnify output frequency as high as possible. At a frequency of 1.45GHz, frequency generator is capable of achieving high efficiency. For its full function, a supply current of 50mA is required.
ADF4360-4BCPZ Features
Available in the 24-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4360-4BCPZ Applications
There are a lot of Analog Devices Inc. ADF4360-4BCPZ Clock Generators applications.
- Frequency shifting decodes
- Small signal recovery
- Wireless base station for LTE, LTE-advanced
- Wireless infrastructure
- Pagers
- Remote telemetry and instrumentation
- Local oscillator source in receiver
- Multi-function printers
- Closed circuit systems
- Carrier synchronization in wired communication
