banner_page

ADF4360-5BCPZRL7

3.3V Fanout Distribution, Integer N Synthesizer (RF) 1.4GHz ADF4360 Clock Generators 24 Pins 24-WFQFN Exposed Pad, CSP 24 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADF4360-5BCPZRL7
  • Package: 24-WFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 247
  • Description: 3.3V Fanout Distribution, Integer N Synthesizer (RF) 1.4GHz ADF4360 Clock Generators 24 Pins 24-WFQFN Exposed Pad, CSP 24 Terminals Surface Mount 3V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-WFQFN Exposed Pad, CSP
Number of Pins 24
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
ECCN Code EAR99
Type Fanout Distribution, Integer N Synthesizer (RF)
Subcategory Other Telecom ICs
Technology BICMOS
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADF4360
Output Clock
Pin Count 24
Number of Outputs 3
Operating Supply Voltage 3.3V
Number of Circuits 1
Operating Supply Current 45mA
Nominal Supply Current 43mA
Frequency (Max) 1.4GHz
Input CMOS, TTL
Ratio - Input:Output 1:2
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Length 4mm
Width 4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADF4360-5BCPZRL7 Overview


Tape & Reel (TR)-method packaging is used for clock ICs. Embedded in the 24-WFQFN Exposed Pad, CSP package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 24 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 3.3V. In this case, CMOS, TTL is designed to be the input of the clock generator. Using 1 circuits, the electronic part's full performance can be accessed. It provides a maximum frequency of 1.4GHz. PLL clock is mounted in the way of Surface Mount. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. A Fanout Distribution, Integer N Synthesizer (RF) is a classification for the electronic part in question. In this IC, a 24-bit frequency generator is designed specifically for use in microprocessors. Related electrical parts can be found for the base part number ADF4360. There is a 24 pin that is available on the digital clock generator. Electronic frequency generator can handle voltages up to 3.3V. The device is usually classified as a type of Other Telecom ICs device. The output frequency is magnified as high as possible with 3 signal outputs. A supply current of 45mA is required to fully operate clock PLL.

ADF4360-5BCPZRL7 Features


Available in the 24-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

ADF4360-5BCPZRL7 Applications


There are a lot of Analog Devices Inc. ADF4360-5BCPZRL7 Clock Generators applications.

  • Ultrasound diagnosis
  • Cell phones
  • Small signal recovery
  • Microwave backhaul IF
  • FMCW Radar
  • Signal modulation and demodulation
  • Main oscillator in receiver
  • High-speed communication applications
  • Digital logic circuits
  • Frequency synthesis

Write a review

Note: HTML is not translated!
    Bad           Good