Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
200Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
ADG1202 |
Pin Count |
6 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Number of Inputs |
1 |
Max Dual Supply Voltage |
16.5V |
-3db Bandwidth |
660MHz |
On-State Resistance (Max) |
200Ohm |
Min Dual Supply Voltage |
5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
2.4pF 2.8pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
170ns, 105ns |
Charge Injection |
-0.8pC |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
250ns |
Normal Position |
NO |
Voltage - Supply, Dual (V±) |
±5V~16.5V |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1202BRJZ-R2 Overview
Shipping overseas is convenient due to the electrical component's packing in SOT-23-6. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. 6 terminations have been made so far. The electrical component body receives 6 pins. Based on SPST - NO switching circuits, these analog multiplexers work. ADG1202 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 200Ohm. For functions related to 6 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 16.5V to a switch device. 5V is the lowest voltage the electrical component should receive. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIt is recommended that you attach at least 5V to your dual power supply. 12V operating voltages are supported by the electronic component. Operating 1 inputs is required.
ADG1202BRJZ-R2 Features
Switch Circuit: SPST - NO
-3db Bandwidth: 660MHz
ADG1202BRJZ-R2 Applications
There are a lot of Analog Devices Inc. ADG1202BRJZ-R2 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Data Acquisition Systems
- Multi-Line E1 Interface Cards
- Industrial and process control systems
- SDH/SONET multiplexers
- E1 Network Equipment
- Audio and video routing
- Digital cross connects (DSX-1)
- PDH Multiplexers
- Industrial