ADG1204YRUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 190Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.3mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1204 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Operating Supply Current | 170μA |
| Power Dissipation | 1.3mW |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Bandwidth | 800MHz |
| Supply Current-Max (Isup) | 0.23mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 90 ns |
| On-State Resistance (Max) | 190Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 1.5pF 4.2pF |
| On-state Resistance Match-Nom | 3.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 85ns, 110ns |
| Charge Injection | -0.7pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 85ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1204YRUZ-REEL Overview
The electronic component is convenient to ship overseas because it is packed in a 14-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 14 terminations. The electronic part delivers high-quality output through its 4 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 14 pins. Based on SP4T switching circuits, these analog multiplexers work. Circuits number 1 make up this analogue multiplexer. Search with ADG1204 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 190Ohm. The datasheets for the 14 pins explain the functions. Dual, Single supply type digital switch with a low cost. An operating current of 170μA would be sufficient for this switch device. There is a voltage range of 12V operating voltages for the electrical part. The transfer of data can be performed over 800MHz bandwidths.
ADG1204YRUZ-REEL Features
4 Channels
Switch Circuit: SP4T
170μA Supply Current
Bandwidth: 800MHz
ADG1204YRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1204YRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- FTTH
- Mechanical reed relay replacement
- Power routing
- Battery-powered systems
- Central office
- USB 1.1 signal switching circuits
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Automotive applications
- SONET/SDH ADM
