Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
32-WFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
32 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Resistance |
200Ohm |
Terminal Finish |
MATTE TIN |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
6.3mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1206 |
Pin Count |
32 |
Operating Supply Voltage |
12V |
Number of Channels |
16 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Nominal Supply Current |
420μA |
Power Dissipation |
6.3mW |
Number of Inputs |
16 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±5V~16.5V |
Bandwidth |
280MHz |
Supply Current-Max (Isup) |
0.42mA |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
85 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
200Ohm |
Min Dual Supply Voltage |
5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
85 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
2pF 12pF |
On-state Resistance Match-Nom |
3.5Ohm |
Switch Time (Ton, Toff) (Max) |
95ns, 100ns |
Charge Injection |
0.5pC |
Channel-to-Channel Matching (ΔRon) |
3.5 Ω |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Drain to Source Resistance |
200Ohm |
Signal Current-Max |
0.03A |
Length |
5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1206YCPZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 32-WFQFN Exposed Pad, CSP. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. In total, there are 32 terminations. This electronic part offers high-quality output due to its 16 channels. With a 15V voltage supply, the electrical component should be turned on and run. A total of 32 pins are injected into the body of the electronic part. It consists of 1 circuits. Using the ADG1206 search parameter, you can discover variants of the switch. There is 200Ohm internal resistance in this digital multiplexer. For functions related to 32 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. It is recommended that the electrical component receives a voltage of 5V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. When using dual power supplies, you should attach at least 5V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. A voltage of 12V can be used to operate the electronic component. There are 16 inputs to be operated. It is possible to transfer data over a 280MHz-bandwidth. Drain to Source resistance is 200Ohm.
ADG1206YCPZ-REEL7 Features
16 Channels
Bandwidth: 280MHz
Drain-to-Source resistance: 200Ohm
ADG1206YCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1206YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Fault Tolerant Systems
- Precision data acquisition
- Private Branch Exchange (PBX)
- Automatic test equipment
- Audio and video switching
- Fiber In The Loop (FITL)
- Digital access cross connects
- E1 Network Equipment
- Access Concentrators