ADG1206YRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 200Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 6.3mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1206 |
| Pin Count | 28 |
| Operating Supply Voltage | 12V |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 260μA |
| Nominal Supply Current | 420μA |
| Power Dissipation | 6.3mW |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 280MHz |
| Supply Current-Max (Isup) | 0.42mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 85 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 200Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 12pF |
| On-state Resistance Match-Nom | 3.5Ohm |
| Switch Time (Ton, Toff) (Max) | 95ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Length | 9.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1206YRUZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 16:1. Around -40°C~125°C TA is the extended operating temperature. In total, 28 terminations have occurred. By its 16 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. The electrical component body receives 28 pins. A 1 circuit is present in this switch device. Try searching for ADG1206 variants of the analog switch ic. This digital multiplexer has 200Ohm internal resistance. The functions of 28 pins can be found in the datasheets. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 5V is the lowest voltage the electrical component should receive. For this digital switch to work, 260μA current would suffice. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. If you are using dual power supplies, you should attach at least 5V. Operating voltages of 12V are compatible with the electrical part. Operating the 16 inputs requires 16 inputs. The data can be transferred over a wide range of bandwidths, called 280MHz bandwidths.
ADG1206YRUZ-REEL7 Features
16 Channels
260μA Supply Current
Bandwidth: 280MHz
ADG1206YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1206YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Remote wireless modules
- Industrial control systems
- Fiber In The Loop (FITL)
- High speed data transmission line cards
- Sample-and-hold systems
- SONET
- E1 Network Equipment
- Microprocessor Controlled Analog Systems
- Sample hold systems
