Parameters |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Resistance |
200Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
6.3mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1207 |
Pin Count |
32 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Power Dissipation |
6.3mW |
Number of Inputs |
16 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±5V~16.5V |
Bandwidth |
490MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
85 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
200Ohm |
Min Dual Supply Voltage |
5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
85 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
2pF 9pF |
On-state Resistance Match-Nom |
3.5Ohm |
Switch Time (Ton, Toff) (Max) |
95ns, 100ns |
Charge Injection |
0.5pC |
Channel-to-Channel Matching (ΔRon) |
3.5 Ω |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
115ns |
Switch-off Time-Max |
140ns |
Signal Current-Max |
0.03A |
Height Seated (Max) |
1mm |
Length |
5mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
32-WFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
32 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
ADG1207YCPZ-REEL7 Overview
The electrical component comes in 32-WFQFN Exposed Pad, CSP packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 8:1. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 32. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. There are 32 pins injected into the electronic part body. It consists of 2 circuits. Using the ADG1207 search parameter, you can discover variants of the switch. There is 200Ohm internal resistance in this digital multiplexer. For functions related to 32 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. The lowest voltage fed to the electronic component should be 5V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. You should attach at least 5V voltage if you are using dual power supply. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. A voltage of 12V can be used to operate the electronic component. It is possible to operate 16 inputs. The data can be transferred over a wide range of bandwidths, called 490MHz bandwidths.
ADG1207YCPZ-REEL7 Features
8 Channels
Bandwidth: 490MHz
ADG1207YCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1207YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- SONET/SDH ADM
- Imaging
- Multi-Line E1 Interface Cards
- Audio signal routing
- Sample-and-hold systems
- DSLAMs
- FTTH
- ATM
- E1 Network Equipment