Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
28-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
28 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Resistance |
200Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
6.3mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1207 |
Pin Count |
28 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Operating Supply Current |
260μA |
Power Dissipation |
6.3mW |
Logic Function |
Multiplexer |
Number of Inputs |
16 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
490MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
85 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
200Ohm |
Min Dual Supply Voltage |
5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
85 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
2pF 9pF |
On-state Resistance Match-Nom |
3.5Ohm |
Switch Time (Ton, Toff) (Max) |
95ns, 100ns |
Charge Injection |
0.5pC |
Channel-to-Channel Matching (ΔRon) |
3.5 Ω |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
115ns |
Switch-off Time-Max |
140ns |
Signal Current-Max |
0.03A |
Length |
9.7mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1207YRUZ-REEL7 Overview
Presented in 28-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 8:1. Operation at a temperature around -40°C~125°C TA. In total, 28 terminations have occurred. Due to its 8 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 28 series. This multiplexer is composed of 2 circuits. Using the ADG1207 search parameter, you can discover variants of the switch. There is 200Ohm internal resistance in this digital multiplexer. The functions of 28 pins can be found in the datasheets. Users shouldn't supply more than 16.5V voltage to the switch device. The digital multiplexer has a low cost Dual, Single supply. 5V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 260μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. The voltage should be at least 5V if you are using dual power supplies. 12V operating voltages are supported by the electronic component. The 16 inputs need to be operated in order to work. 490MHz bandwidths enable data to be transferred.
ADG1207YRUZ-REEL7 Features
8 Channels
260μA Supply Current
Bandwidth: 490MHz
ADG1207YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1207YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Fault Tolerant Systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio and video routing
- Low-Voltage
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Communication systems
- Signal routing between systems
- Avionics test equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)