ADG1208YCPZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 200Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 4.7mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1208 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 4.7mW |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±5V~16.5V |
| Bandwidth | 550MHz |
| Supply Current-Max (Isup) | 0.33mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 83 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 200Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 1.5pF 7pF |
| On-state Resistance Match-Nom | 3.5Ohm |
| Switch Time (Ton, Toff) (Max) | 95ns, 100ns |
| Charge Injection | 0.4pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1208YCPZ-REEL Overview
This electronic part is conveniently packaged in 16-VQFN Exposed Pad, CSP, making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. 8:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 16. A high-quality output is provided by the electrical component's 8 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. There are 1 circuits in this switch device. Try searching for ADG1208 variants of the analog switch ic. A 200Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. A low voltage of 5V should be applied to the electronic component. There is no problem with using dual supply voltage, but it should not exceed 16.5V. It is recommended that you attach at least 5V to your dual power supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. A voltage of 12V can be used to operate the electronic component. There are 550MHz bandwidths for data transfer.
ADG1208YCPZ-REEL Features
8 Channels
Bandwidth: 550MHz
ADG1208YCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1208YCPZ-REEL Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Optical Applications
- Sample-and-hold systems
- Fiber to the Home
- Avionics and Military Systems
- SONET/SDH ADM
- Automotive applications
- Industrial and process control systems
- Intelligent PBX
- RGB switches
