ADG1208YRUZ

95ns, 100ns 200Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1208 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1208YRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 825
Description: 95ns, 100ns 200Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1208 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1208
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	220μA
Power Dissipation	4.7mW
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Bandwidth	550MHz
Supply Current-Max (Isup)	0.33mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	83 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.5pF 7pF
On-state Resistance Match-Nom	3.5Ohm
Switch Time (Ton, Toff) (Max)	95ns, 100ns
Charge Injection	0.4pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	200Ohm
Signal Current-Max	0.03A
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.7mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1

ADG1208YRUZ Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 8:1. Increasing operating temperature to around -40°C~125°C TA. In total, there have been 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. A total of 1 circuits make up this switch device. Try searching with ADG1208 if you're looking for variants. In this multiplexer, the internal resistance is 200Ohm. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 16.5V to a switch device. The lowest voltage the electronic part should receive is 5V. There is no problem with using dual supply voltage, but it should not exceed 16.5V. For dual power supplies, a voltage of at least 5V should be attached. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages of 12V are compatible with the electrical part. The 8 inputs need to be operated in order to work. The transfer of data can be performed over 550MHz bandwidths. This electronic component presents a Drain to Source resistance of 200Ohm.