ADG1208YRZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 200Ohm |
| Max Power Dissipation | 4.7mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1208 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 220μA |
| Power Dissipation | 4.7mW |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 550MHz |
| Supply Current-Max (Isup) | 0.33mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 83 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 200Ohm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 1.5pF 7pF |
| On-state Resistance Match-Nom | 3.5Ohm |
| Switch Time (Ton, Toff) (Max) | 95ns, 100ns |
| Charge Injection | 0.4pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1208YRZ-REEL7 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~125°C TA extended. There are 16 terminations totally. This electronic part offers high-quality output due to its 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. This electronic part can be found in the 16 series. The circuits in this analogue multiplexer number 1. Using the ADG1208 search parameter, you can discover variants of the switch. This digital multiplexer has 200Ohm internal resistance. The datasheets for the 16 pins explain the functions. normally, users should not supply switches with voltages higher than 16.5V. Analog switch ics with Dual, Single supply type are cost-effective. 5V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 220μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. For dual power supplies, a voltage of at least 5V should be attached. Operating voltages of 12V are compatible with the electrical part. There are 550MHz bandwidths for data transfer.
ADG1208YRZ-REEL7 Features
8 Channels
220μA Supply Current
Bandwidth: 550MHz
ADG1208YRZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1208YRZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Intelligent PBX
- Multiplexers
- PBX interfaces
- Avionics and Military Systems
- Video switching
- Frame Relay Equipment
- Sample-and-hold systems
- Optical Applications
- SONET
