ADG1209YCPZ-REEL

95ns, 100ns SP4T 200Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1209 16 Pins 100pA 15V 16-VQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1209YCPZ-REEL
Package: 16-VQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 992
Description: 95ns, 100ns SP4T 200Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1209 16 Pins 100pA 15V 16-VQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.5pF 4.5pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	95ns, 100ns
Charge Injection	0.4pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	115ns
Signal Current-Max	0.03A
Height Seated (Max)	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.8mW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1209
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Power Dissipation	4.8mW
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Bandwidth	550MHz
Supply Current-Max (Isup)	0.33mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	83 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm

ADG1209YCPZ-REEL Overview

The electronic component is convenient to ship overseas because it is packed in a 16-VQFN Exposed Pad, CSP. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 4:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. 16 terminations have been made so far. High-quality output is provided by the electronic component's 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. There is an electrical component included in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. The multiplexer consists of 2 circuits. Try searching with ADG1209 if you're looking for variants. Internally, this switch multiplexer has a resistance of 200Ohm. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 16.5V. The lowest voltage fed to the electronic component should be 5V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. In the case of dual power supplies, you should connect at least 5V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. Operating voltages of 12V are compatible with the electrical part. The 8 inputs need to be operated in order to work. 550MHz bandwidths enable data to be transferred.