ADG1209YCPZ-REEL7

95ns, 100ns SP4T 200Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1209 16 Pins 100pA 15V 16-VQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1209YCPZ-REEL7
Package: 16-VQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 356
Description: 95ns, 100ns SP4T 200Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1209 16 Pins 100pA 15V 16-VQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Max Power Dissipation	4.8mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1209
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Operating Supply Current	220μA
Nominal Supply Current	220μA
Power Dissipation	4.8mW
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	550MHz
Supply Current-Max (Isup)	0.33mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	83 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.5pF 4.5pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	95ns, 100ns
Charge Injection	0.4pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	115ns
Signal Current-Max	0.03A
Height Seated (Max)	1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1209YCPZ-REEL7 Overview

This electronic part is conveniently packaged in 16-VQFN Exposed Pad, CSP, making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 4:1. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 16 series. A SP4T switching circuit is used for these analog switches. 2 circuits are used in this analogue multiplexer. Try searching with ADG1209 to find analog multiplexer variants. An switch multiplexer with 200Ohm internal resistance has a value of 200Ohm. The functions of 16 pins can be found in the datasheets. Multiplexers should not be powered above 16.5V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 220μA. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VA dual power supply should have at least 5V voltage attached. 12V operating voltages are supported by the electronic component. In order to operate the 8 inputs, there are several steps to follow. It is possible to transfer data over a 550MHz-bandwidth.