Parameters |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Nominal Supply Current |
220μA |
Power Dissipation |
4.8mW |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±5V~16.5V |
Bandwidth |
550MHz |
Supply Current-Max (Isup) |
0.33mA |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
83 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
200Ohm |
Min Dual Supply Voltage |
5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
85 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
1.5pF 4.5pF |
On-state Resistance Match-Nom |
3.5Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
95ns, 100ns |
Charge Injection |
0.4pC |
Channel-to-Channel Matching (ΔRon) |
3.5 Ω |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
115ns |
Switch-off Time-Max |
140ns |
Drain to Source Resistance |
120Ohm |
Signal Current-Max |
0.03A |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
120Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
4.8mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1209 |
Pin Count |
16 |
ADG1209YRZ Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. The operating temperature is extended to around -40°C~125°C TA. There are 16 terminations totally. A electrical component with 4 channels is capable of high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. There are 16 pins injected into the electronic part body. A SP4T switching circuit is used to build these analog multiplexers. 2 circuits are used in this analogue multiplexer. Use ADG1209 to search for variants of the digital switches. As far as internal resistance is concerned, it has 120Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. The lowest voltage fed to the electronic component should be 5V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. When using dual power supplies, you should attach at least 5V. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. Operating voltages range from 12V. Operating the 8 inputs requires 8 inputs. The data can be transferred over a wide range of bandwidths, called 550MHz bandwidths. There is 120Ohm resistance between the Drain and Source on this part.
ADG1209YRZ Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 550MHz
Drain-to-Source resistance: 120Ohm
ADG1209YRZ Applications
There are a lot of Analog Devices Inc. ADG1209YRZ Analog Switches & Multiplexers ICs applications.
- High-Voltage
- PBX interfaces
- Mechanical reed relay replacement
- Multiplexers
- PBXs
- Voice over IP/DSL – Integrated Access Devices, Smart
- Microprocessor Controlled Analog Systems
- Audio/video switches
- Relay Replacement
- Private Branch Exchange (PBX)