ADG1209YRZ-REEL7

95ns, 100ns SP4T 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1209 16 Pins 100pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1209YRZ-REEL7
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 232
Description: 95ns, 100ns SP4T 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1209 16 Pins 100pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Max Power Dissipation	4.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1209
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Operating Supply Current	220μA
Power Dissipation	4.8mW
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	550MHz
Supply Current-Max (Isup)	0.33mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	83 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.5pF 4.5pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	95ns, 100ns
Charge Injection	0.4pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	115ns
Signal Current-Max	0.03A
Height Seated (Max)	1.75mm
Length	9.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1209YRZ-REEL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Operational temperature extended around -40°C~125°C TA. There are 16 terminations totally. High-quality output is provided by the electronic component's 4 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. 16 pins are injected to the electronic part body. Circuits based on SP4T switching are used to construct these analog switch ics. The multiplexer consists of 2 circuits. Try searching with ADG1209 to find analog multiplexer variants. A 200Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Analog switch ics with Dual, Single supply type are cost-effective. 5V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 220μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. With dual power supplies, you should attach at least 5V. 12V operating voltages can be used with this electrical part. In order to operate the 8 inputs, there are several steps to follow. 550MHz bandwidths enable data to be transferred.